Intelli-Source Candidate # NA-1295479029

Reservoir Engineer

SUMMARY OF QUALIFICATIONS 

• · Diversified petroleum engineering experience including Reservoir, Drilling, Completion, Production, and Operations.
• · Reservoir management, pressure transient analysis, fluid property analysis, numerical reservoir simulation, reservoir characterization, understanding of surface/facility issues, and excellent knowledge of production engineering.
• · Extensive experience with decline curve, volumetric, and material balance reserve evaluation, surveillance analysis, nodal analysis, and well test analysis.
• · Strong experience in optimization of mature fields, field development planning, well performance forecast and modeling, forecast production and reserve estimation, risk and economic analysis.
• · Experience with open and cased hole log analysis.
• · Uncommon organizational skills to plan and execute studies.
• · Excellent communication skills-written, verbal, and presentation.
• · Remarkable ability to work in multi-disciplinary teams consisting of drilling, completion, reservoir, and production engineers.

PROFESSIONAL EXPERIENCE

 Contract Petroleum Engineer 2009 – Present 

Developed program to return 400 Panhandle Field wells to production for a small independent oil company that purchased 17 leases in Carson and Hutchinson County, Texas. Determined repair work of production equipment ranging from tank batteries, flowlines, pumping units tubing, rods, and downhole pumps needed to return wells to production. Prepared detailed workover procedures including additional perforations, stimulation, cost estimates, and established priorities for returning inactive wells to production. Reactivation of first ten wells increased production from 20 BOPD & 50 MCFD to over 50 BOPD and 125 MCFD at a cost of $6,500 per well. 

 Consulting Engineer 1994 – 2009

Worked with Sol Smith Petroleum Engineer Inc. in Austin, Texas. Prepared Railroad Commission research, walk-through permitting, State agency research, and regulatory compliance reviews. Provided turn-key saltwater disposal permitting, production and completion report filing, and other professional services and consulting.

Worked with various civil engineering firms and municipalities throughout Central Texas. Designed streets, drainage, and piping required for fresh water and sewer systems for residential and municipal projects. Prepared construction drawings, cost estimates, and engineering reports for City, County, State, and Federal regulatory approval. Reviewed and prepared comments for proposed Planned Development Districts (PDD), annexation, preliminary and final plats, subdivision/site development, and site development plans for compliance with City, County, State, and Federal regulation and acceptable engineering practices. Provided office and field engineering support for all approved water, wastewater, street, and drainage capital improvement projects funded by certificate of obligations. Reviewed and recommended payment for all consulting engineering and construction contract pay requests. Managed and directed daily activity of City’s engineering and inspection personnel.

Senior Petroleum Engineer for J.M. Huber 1982-1994

Provided reservoir, production, drilling, remedial, and completion engineering for all phases of well production from drilling, completion, remedial and workover, and abandonment operations. Worked closely with exploration department to determine potential reserves and economic evaluation of exploration prospects and property acquisitions. Prepared well drilling prognosis specifying total drilling depths, casing sizes, cement and drilling mud programs to allow well to be drilled in accordance to the latest Field and Statewide Rules. Prepared recompletion, workover recommendations and procedures, property evaluations, reservoir studies, reserve and production forecasts, economic analysis, and plugging procedures for company’s exploration and production activities. Evaluated downhole electric logs, determined perforation intervals, and made casing point election recommendations Evaluated producing properties to identify potential unexploited reserves. Worked with engineering consultants on special projects and preparation of annual company reserve reports. Monitored daily production and prepared workover and re-completion procedures to improve production. Worked with production foremen to reduce monthly operating expenses. Prepared final well analysis for marginally economic oil and gas wells. For wells with no uphole recompletion or stimulation potential, recommendations were made to either plug and abandon the property or place it for sale.

Production Engineer for Conoco and Tenneco 1976-1982

Provided a broad scope of subsurface and production engineering in conjunction with exploration and other departments to help maximize the company’s profitability through maintaining production levels and minimizing operating expenses in a safe and environmentally sound manner. Evaluated and recommended downhole corrosion prevention, artificial lift optimization, surface facility expansion, chemical treatment optimization, compression, and automation. Prepared well Repair & Maintenance and workover procedures, cost estimates, project economics, and AFE documentation for submittal to management. Provided onsite technical support to ensure quality control during critical operations such as logging, perforating, cement squeezing, and stimulation. Provided onsite supervision of all special well work operations from drilling to plugging. Ensured compliance with all company policies, procedures and plans with federal, state and local regulations.

 COMPUTER SOFTWARE EXPERIENCE

• · MBAL and Oil Water Gas Water Material Balance software.
• · POGO/PROPHET/ARIES/PEEP Economics
• · OFM (Oil Field Manger) Schlumberger software.
• · Knowledge of Saphire, PanSystem, and Welltest 200 Well Test Analysis software
• · Open & Cased Hole Log Analysis Programs
• · FlowMaster Pressure Pipe Design
• · MSWord, Excel, AutoCAD software, 2

EDUCATION

Oklahoma State University,

Bachelor of Science in Mechanical Engineering

• · Received major oil company training in reservoir engineering, water flooding operations, artificial lift equipment selection, production system design, open and cased hole logging programs and interpretation, completion and remedial procedures, acidizing and fracturing stimulation techniques, technical writing, and economic analysis.

Please send me more information on this candidate

Candidate # NA-3785682434

Sr. Reservoir Engineer

                                                                                Summary

Since 1980, worked on a variety of oil, gas and gas-condensate reservoirs, in clastic and carbonate formations. Tasks included drawing development plans for new reservoirs, management of mature assets, and evaluations of prospects. I have used simulation extensively, and come to recognize that models may be of little value, unless they are based on reliable logging, PVT, special core analysis, and transient well test data, plus thorough reservoir characterization. My aim has always been to optimize recovery, reduce costs, and in general, propose pragmatic development, and workover plans. Similarly, regarding evaluations, I have always sought to present objective assessments, based on the available data, and the performance of analog reservoirs.

                                                                              Experience

2007- 10/2010. At  the Houston  office  of  BHP-Billiton,  completed  history  matching  the  performance  of  three reservoirs of  the Angostura Field, in Trinidad  and Tobago. Heavy  faulting and  the  need  to  incorporate a pipeline system  to  the combined  model  made  the  project extremely challenging. Angostura has  a STOIIP of  300 mmstb  and  a GIIP of 900 bscf.

Marathon Oil 1984-2007

1998-2007. At the Lafayette, and Houston offices of Marathon Oil Company, worked on the following projects:

-NC-98 Reservoir in Libya. Geology: Clastics. Reservoir fluid: Wet gas and volatile oil. GIIP: 3.0tscf.  STOOIP: 1.0 billion barrels. Responsibilities: Liaising with laboratories to set up PVT and SCAL experiments, evaluation of existing PVT, special core analysis, and well test data, plus drawing alternative development plans involving different plateau rates, for reservoir pressure blow down, and gas recycling scenarios.

-Faregh Reservoir in Libya. Geology: Clastics. Reservoir fluids: Oil and wet gas. GIIP: 7.0tscf STOIIP: 1.5 mmstbo. Responsibilities: Well test analyses, and evaluation of different development scenarios using the ECLIPSE 200, and ECLIPSE  300 software.

-Defa, and Darra-Joffra reservoirs in Libya. Geology: Clastics. Reservoir fluids: Oil and  gas. Defa STOIIP: 9.0 mmstbo. Darra-Joffra STOOIP: 4.5 mmstbo, GIIP: 1.8 tscf. I was a member of a joint Marathon-ConocoPhillips-Hess team, whose tasks were planning the re-development of the said reservoirs. 

-Petronius  in the Gulf of Mexico. Geology: Unconsolidated sandstone. Reservoir fluids: Oil and gascap gas. STOIIP: 550 mmstbo. Responsibilities: Revision of  the development plan. Evaluation of the field data, and history matching led to modifications that increased the oil rate by 12000 stbo/d.         

-Camden Hills in the Gulf of Mexico. Geology: Unconsolidated sandstone. Reservoir fluid: Dry gas. GIIP: 170 bscf. Responsibilities: Drawing of a development plan, and designing the pipeline to gas gathering center. 

-Ewing Bank in the Gulf of Mexico. Geology: Unconsolidated clastics. Reservoir fluid: Undersaturated oil. STOIIP: 350mmstb. Responsibilities: History matching the performance of the reservoir during the years 1994 – 1999. Modeling led to radical revision of the drilling and recompletion programs

-South Pass C and D Reservoirs in the Gulf of Mexico. Geology: Sandstone. Reservoir fluids: Saturated oil and gas. Hydrocarbon initially in place: 85mmstbo and 285bscf. Two models were built and history matched. Results were used to obtain permission from the MMS to blow down the said reservoirs.

1987-1998. At the Production Technology Center of Marathon Oil Company, in Littleton Colorado, I worked on the following projects:

-Lagunillas, Intercampo, Dacion  and Mata-Acema Reservoirs in Lake Maracaibo, Venezuela. Geology: Sandstone. Reservoir fluid: Oil of gravity in the range 15-32 degrees API. Combined oil initially in place: 7.0bstb. As a member of a multidisciplinary group, my responsibility was to assess the future potential of these reservoirs. This was accomplished through decline curve analyses, and  simulation of the heavy oil reservoirs.

-Oyster Reservoir in the Gulf of Mexico. Geology: Unconsolidated sandstone. Reservoir fluid: Undersaturated oil. STOIIP: 40mmstb. Responsibilities: Drawing of a development plan of this reservoir.

-North Brae Reservoir in the British Sector of the North Sea. Geology: Sandstone and conglomerate. Reservoir  fluid: Gas condensate. GIIP: 1.2tscf.  Development plan based on gas recycling, partial blowdown and final blowdown. Responsibilities: History matching the performance of the reservoir from 1988 through 1996, using ECLIPSE 300. Through prediction runs, I was able to demonstrate that condensate recovery could be improved by replacing crestal with peripheral gas injection, in the top layers of the reservoir.

-East Brae Reservoir in the British Sector of the North Sea. Geology: Sandstone and conglomerate. Reservoir fluid: Gas condensate. GIIP: 2.1tscf. The development plan of this reservoir was similar to that of North Brae.  Responsibilities: Reverse decline in condensate production After history matching the reservoir model, a  re-completion plan was devised, that increased the condensate rate by 13000 bcpd.

-South Brae Reservoir in the British Sector of the North Sea. Geology: Sandstone and conglomerate. Reservoir fluid: Undersaturated oil. STOIIP: 760mmstb. Responsibilities: Construction and history matching a model with an extended grid that included the nearby Miller, East Miller and Central Brae reservoirs which were in communication with South Brae. 

 Additional modeling work involved evaluation of a pilot water-alternating-gas scheme (WAG). To this end the model was modified to include the Todd and Longstaff approximation, and additional information from whole core WAG floods. Swollen oil PVT input had been incorporated during history matching. Main conclusion was that WAG could be significantly more effective than straight forward water injection.  

-East Cameron Reservoir in the Gulf of Mexico. Geology: Clastics. Reservoir fluid: Undersaturated oil. STOIIP: 20mmstb. Using a history matched model, I was able to show that water injection could be discontinued without reducing recovery.

-Yates Reservoir in Texas. Geology: Carbonates. Reservoir fluid: Saturated oil. STOIIP: 4.0bstb. Reservoir  plan: Production from oil leg fractures, supported  by  crestal  carbon dioxide, and  nitrogen injection, plus aquifer influx. Responsibilities: History  matching the field performance of the period 1927 – 1995 using the  dual porosity-dual permeability option of ECLIPSE 200. Matching  parameters  were the pressure data,  the depths of the gas-oil, and oil-water contacts as functions of time, and log derived gas-cap oil saturation data. Modeling confirmed  that production was maintained through drainage of oil trapped, in the gascap matrix blocks. Prediction runs showed that increased gas injection accelerated drainage, and capacity was increased accordingly.

-Indian Basin Reservoir in New Mexico. Geology: Carbonates. Reservoir fluid: Wet gas. GIIP: 2.0 tscf. Responsibilities: Build and history match a model with data of the period 1962-1989, to assess the potential of horizontal wells, and gas compression requirements.

-Sand Dunes Reservoir in Wyoming. Geology: Clastics. Reservoir fluid: Undersaturated oil. STOIIP: 2.0mmstb. Responsibilities: Design a development scenario based on gas injection at minimum miscibility pressure.

-Kakap-KH7 Reservoir in Indonesia. Geology: Clastics. Reservoir fluid: Undersaturated oil. STOIIP: 97mmstb. Responsibilities: STOIIP determination, from material balance calculations, and modeling.

-Alba Reservoir in the British Sector of the North Sea. . Geology: Clastics. Reservoir fluid: Undersaturated oil. STOIIP: 1.2bstb. Responsibilities: Drawing a development plan.

-McArthur River Project. –G Zone and West Foreland Reservoirs in Alaska. Geology: Clastics. Reservoir fluid: Undersaturated oil. STOIIP: 300mmstb. Responsibilities: Comprehensive workover plan through modeling.

In addition to the aforesaid, I also worked on projects of shorter duration such as: transient analyses; modeling of hydraulically fractured, conventional, and horizontal wells; proposals for workovers and/or new well locations for various projects; and  recommendations for well tests and logging surveys. 

1984-1987. At the Aberdeen , and London offices of Marathon Oil UK Limited, I worked on the following projects:

-North Brae Reservoir in the British Sector of the North Sea. Geology: Sandstone and conglomerate. Reservoir fluid: Gas condensate. GIIP: 1.2tscf. Responsibilities: Creating a development plan based on gas recycling, partial  blowdown and final blowdown of the reservoir, using ECLIPSE 300.

-South Brae Reservoir in the British Sector of the North Sea. Geology: Sandstone and conglomerate. Reservoir fluid:  Undersaturated oil. STOIIP: 760mmstb. Responsibilities: Build a history matched reservoir model, as dictated by the UK Department of Energy.

-Logging and testing of Marathon wells in the North Sea. These included PLT, RFT, pressure build-up and fall-off surveys, plus collection of PVT samples. Duties involved writing procedures, supervision of field work and analyses of the acquired data.

1979-1984. At the Glasgow office of  Britoil Plc, I worked on the following projects:

-Ninian Field in the British Sector of the North Sea. Geology: Clastics. Reservoir fluid: Undersaturated oil. STOIIP: 2.6bstb. Responsibilities: Built and history match a model with data of the period 1978-1983; use model to evaluate proposals, for further development, put forward by the operator, Chevron Petroleum UK Ltd; represent Britoil at reservoir engineering meetings with partners and approve AFE’s.

-Murchison, Statfjord, Columba and Bressay reservoirs in the North Sea. Conducted small scale reservoir studies relating to these assets.

                                                                       Educational Attainment

-University of Strathclyde, Glasgow(UK), PhD in Geohydrology.

-National Technical University of Athens, Greece, BSc in Civil Engineering.

                                                               Petroleum Engineering Training

-Saphir Software.

-Reservoir Engineering Research Institute, Palo Alto CA. Course in thermodynamics of reservoir fluids.

-Colorado School of Mines, Golden CO. One semester course in thermodynamics and phase behavior.

-Herriot-Watt University, Edinburgh UK. Summer school on petroleum engineering.

-Intercomp SSI. Course on compositional modeling.

-CMG. Course in computer simulation of thermal EOR schemes.

-Schlumberger. Basic log interpretation course.

-Schlumberger. Production logging course.

-OGCI. Production operations.

-ERC/RRI. Geology of the North Sea reservoirs.

-Halliburton. Hydraulic fracturing course.

                                                                     Professional Affiliations

-Society of Petroleum Engineers

 Please send me more information on this candidate

Candidate # NA-2090714636

Reservoir Engineer

Profile Summary 

• +8 years experienced in classical reservoir engineering, reservoir simulation, numerical modeling, geostatistical reservoir chracterization, well test transient analysis, PVT fluid characterization, chemical EOR flooding, decline curve analysis, material balance application, and economic evaluation.
• Worked in integrated team study at different projects to evaluate alternative development schemes in several operated fields from the perspective of oil recovery and economics.
• Excellent computer skills with a proficient working knowledge of ECLIPSE, CMG, CMOST (uncertainty analysis and automatic history matching), MORE, STARS, UTCHEM, MBAL, PROSPER, DSS, Nodal analysis, GSLIB (geostatistic), MATLAB, FORTRAN, Visual Basic, and MATHEMATICA.
• Experienced in naturally fractured reservoir, well testing, field development project, all aspects of CO2 enhanced oil recovery, gel-polymer, and surfactant flood (wettability alteration).

Education 

PhD in Petroleum Engineering, University of Kansas, 2008

Thesis Topic: Improving Reservoir Characterization by Conditioning Geostatistical Models to Dynamic Data using Multivariate Statistical Analysis.

M. Sc. in Mechanical Engineering, University of Tabriz, 1996

Thesis Topic: Modeling and Simulation of Heat Transfer Coefficient in Nucleate Pool Boiling of Binary and Ternary Mixtures.                                   

B. Sc. in Mechanical Engineering, Abadan Institute of Technology (AIT), 1993

Programming Numerical Solutions for Governing Partial Differential Equations of fluid Flow through a Pipe by Finite Element Method. 

Professional Experience

Major Independent Company, Reservoir Engineer (2008-Present)

• Provided reservoir engineering technical input required for CO2 field expansion projects in different fields including development of dynamic reservoir simulations (volumetric analysis, material balance, decline curve, PVT Characterization, SCAL, nodal analysis, well testing analysis) for a wide range of reservoir engineering and integrated reservoir problems.

• Provided technical and analytical support to the various groups in the company including:
  • Houston Business Development Group: Contribute to team development proposals, economic evaluation of alternative development plans for prospective fields for acquisition.
  • Midland Eastern Shelf Team: Worked directly with Eastern Shelf Team to define optimum development  scenarios in the CO2 EOR process for several fields in Texas. Designed and developed simulation models to match the field history and predict future performance under various CO2 flood plans. Performed sensitivity analysis to find an optimum economical plan. Conducted material balance analysis using MBAL to find the type and extent of the aquifer.
  • Midland Yates Team: Generated a dual porosity simulation model to investigate mechanism involving in chemical surfactant flooding (wettability alteration). Work closely with Yates team to design and identify two pilots for surfactant flooding for optimum EOR scenario. Simulation study of feasibility of CO2 huff n puff EOR process for west side of the Yates field and perform sensitivity analysis to find optimum economic plan.
  • Houston Resource Group: provided technical support by writing a computer program to predict of CO2 well bottom hole pressure for McElmo Dome field.

Same Company, Reservoir Engineer Intern (Summer 2008)

• Performed PVT characterization and develop EOS for Claytonville, Katz, and Yates Fields. Achieve better accuracy and reduce simulation time using components relative to previous models. Build a dual porosity simulation model to match the history of Claytonville field data.

Tertiary Oil Recovery Project (TORP), University of Kansas

 Graduate Research Assistant (2002-2008)

• Developed a systematic methodology to improve reservoir modeling by conditioning geostatistical models to well test transient dynamic data: a case study from the CO2 flood pilot area in the Hull-Gurney field, Kansas.

• Lead investigator of the PVT characterization of the crude oil sample from Hall-Gurney field using laboratory experiments and simulation to generate EOS.
• Worked in multidisciplinary team to build simulation model of Hall-Gurney field, Kansas. Complete history match of the field data and evaluate alternative development schemes to optimize oil recovery of CO2 flooding.
• Performed decline curve analysis to predict the performance of production wells in the Arbuckle formation prior to gel-polymer treatment.
• Investigated various disproportionate permeability reduction (DPR) mechanisms in gel-polymer treatment process and develop a novel method to predict the well performance after treatment using Bayesian network analysis: a case study for gel-polymer treatment in Arbuckle formation.

Proposals and Publications

Available upon request

Honors and Membership

• Active Member, Society of Petroleum Engineering

              Treasurer of SPE chapter of KU

• Distinction of Excellence, University of Tabriz Dept. of Mechanical Engineering- awarded high achiever graduate (1st rank), 1996.

Distinction of Excellence, Abadan Institute of Technology (AIT), Dept. of Mechanical Engineering- Awarded very competitive scholarship for undergraduate study (top 1)

 Please send me more information on this candidate

GEOPHYSICIST

SOUTHERN CALIFORNIA

Join this leading Energy Company and use your education and experience and be recognized and rewarded!

Click here to apply online

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Resume CV RSS Feed

For more information email us

GEOPHYSICAL ADVISOR

BEAUTIFUL SOUTHERN CALIFORNIA

Leading Global Energy Firm in Southern California is seeking an experienced Geophysical Advisor to join the Exploration Team in Southern California.

The selected candidate will be offered an outstanding Total Compensation package including bonus potential and generous benefits.

Click here to apply online

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Resume CV RSS Feed

For more information email us

SENIOR GEOMODELER

HOUSTON, TEXAS

Apply your advanced education and experience as a Senior Geomodeler for a leading Energy Company in Houston, Texas.

Using your advance knowledge you will be responsible for the following:

Click here to apply online

 Visit Energy Careers Job Board 

International Energy Engineering Jobs RSS Feed

International Energy Engineering Resume CV RSS Feed

For more information email us

SENIOR ADVISOR RESERVOIR ENGINEERING EOR

HOUSTON, TEXAS

Unique opportunity to use your advanced experience in EOR to work at a leading Energy Company in Houston, Texas.

As one of the leading experts in EOR, you will be responsible for the following:

An outstanding Total Compensation Package awaits the selected candidate.

Click here to apply online

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Resume CV RSS Feed

For more information email us

COMPLETIONS ENGINEERING SUPERVISOR

HOUSTON, TEXAS

Our client, a leader in the Energy industry, is seeking an experienced Completions Engineering Supervisor to join them at the Houston office.  The key management level position is responsible for managing the Completions Engineers to ensure that all completions and stimulations are suitably designed and supported so that the operations can be conducted in a safe, environmentally acceptable, and efficient manner, and in compliance with Company policies and government regulations.

Click here to apply online

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Resume CV RSS Feed

For more information email us

HIGHLIGHTS OF QUALIFICATIONS:

-     Petrophysicist with 10+ years experience worked in carbonate reservoir and sandstone reservoir, including 2 years as Petrophysicist in Canada and 12 years in China, 2 years as Geophysical Technician in Canada

-     Good experience in shaly sand reservoir, heavy oil carbonate reservoir and fracture identification, familiar with core analysis and interpretation

-          Skilled in well log data processing, analyzing, interpreting, and formation evaluation, including open hole and cased hole logs

-          Strong software skills in GeoGraphix and GeoFrame, as well as geoSCOUT, and Suffer

-          Calculated reservoir parameters (porosity, permeability, lithology, saturations, and net pay)

-          Skilled in constructing geological cross-sections and curve normalization

-          Three years quick interpretation experience in coal bed methane well log analysis on well-site, log data quality control and correction

-          Bachelor Degree in Geophysical Exploration

PROFESSIONAL EXPERIENCE:

Petrophysical Advisor January 2010-June 2010

Major National Oil Company, Damascus, Syria

-          Conducting Tishrine and Sheikh Mansour field (672 Km2, 520+ oil wells) and Oudeh field (192 Km2, 170+ oil wells) in Syria, both are heavy oil carbonate reservoir

-          Providing formation properties and reservoir characterization for Geologist, reservoir simulation and Geophysicist

-          Writing petrophysical studying report for each well

-          Demonstrated ability to balance analyzing single wells by GeoGraphix, and setting up multi-well database by GeoFrame at the same time

-          Providing new wells and surrounding wells petrophysical parameters

-          Providing knowledge transfer and problem solving

Petrophysicist June 2008-December 2009

Tanganyika Oil Company Ltd, Calgary

-          Conducting Tishrine and Sheikh Mansour field, and Oudeh field in Syria

-          Petrophysical analysis (Processed, Analyzed 100+ wells using GeoGraphix)

-          Identifying lithology and fracture from FMI, mud logs and well logs

-          Providing formation properties and reservoir characterization for Petrel modeling, reservoir simulation and Geophysicist

-          Calibrating well log porosity and permeability using core data analysis and cutting descriptions

-          Writing petrophysical studying report for each well

-          Core Review at New Horizon Core Storage and BodyCote Labs

Geophysical Technician 2006-May 2008

Divestco Inc., Calgary

-          Archiving and indexing field, stack and basic seismic data by Indexing Tool, GAS, Media track, Aim, and DDS

-          Copying seismic data from historical media to disk system by UNIX, M5U, 9 tracks and DEMUX

-          Reformatting SEGY, SEGA, SEGD and SEGB seismic data as per client request

-          Performing ACC Verifier Project by ACC Verifier, Database, and OBS

-          Reformatting IBMTRACE Lacey file to SEGY, classifying stack data by SEGYNAMER

Petrophysicist 1993-2005

China Petroleum & Chemical Corporation (SINOPEC)

-          Wrote 100+ well log interpretation reports

-          Processed and interpreted well log data of 300+ wells including open hole and cased hole from different basins

-          Experienced in coal bed methane well log analysis in North of China

-    Determined formation properties (porosity, water saturation, net pay) in clastic reservoirs from well log interpretation and core analysis

-          Identified lithology, especially in shaly sand profile by analyzing well log data

-          Organized well log data, data QC and correction on well-site

-          Evaluated petrophysical data for well drilling completion or abandonment decisions, perforation intervals and reserves estimates

-          Picked tops and completed stratigraphic cross sections

-          Created structure map, isopach, net pay and HCPV

Well Log Technician

SINOPEC, China                                                                                                     1991-1993

-    Digitized well log curves

-    Prepared log curves and compiled reports

-    Collected core data, test data, production data and seismic data, and maintained the database

-    Scanned, classified documents and images, log data entry

-    Converted raw data to LIS and LAS files

EDUCATION:

Bachelor Degree in Geophysical Exploration                                                                 1991

Changchun University of Geology, Changchun, China

English as Second Language program                                                                2005-2006

Bow Valley College and CCIS ESL Program

Please send me more information on this candidate

ENGINEER – OIL & GAS EXPLORATION & PRODUCTION

Increased Revenues / Profitability s New Well Development s Project Leadership

Dynamic, hands-on leader with history of maximizing both top line and profitability by overseeing all aspects of large oil & gas projects. Expertise in conducting in-depth analysis and conducting studies to determine project financial viability. Broad, in-depth knowledge of industry. Poised professional with superlative communication skills; adept at building key relationships with customer leaderships, and contractors, and regulatory agency professionals. Proven ability to effectively motivate and pilot goal-focused, highly productive teams. Equally adept in both back-office operations and in field. Dedicated to achieving highest quality levels while serving both short- and long-term corporate objectives.

Areas of Expertise

s Financial Due Diligence       s Team Leadership      s Proposal Creation

s Strategic Planning    s Quality Assurance / Control s Documentation Mgmt.

s Operations Coordination      s Regulatory Compliance        s Communications

s Contractor Relations            s New Opportunity Recognition        s Customer Service

s Financial Mgmt. / P&L        s Field Studies / Forecasting   s Problem Resolution

PROFESSIONAL SUMMARY

Confidential Company           Houston, TX

Reservoir Engineer- Contract assignment       06/10 to 09/10

Provided client with Deep Water field study and reserve documentation. Conducted field study to identify  operated  opportunities. Provided  reserves input documentation and RyVol reserves calculations. Conducted geological / engineering review of 8 mapped fault blocks.

Confidential Company           Houston, TX

Senior Reservoir Engineer- Contract assignment       2008 to 2009

Provided YE 08 reserve, investment, and expense documentation  using PHD-WIN, plus identified $20M re-development opportunities.

Conducted field study to identify 50 PBP & PUD opportunities; obtained 200 production records from Dwights, and conducted geological / engineering review of 100 mapped fault blocks. Analyzed each reservoir drive mechanism, authored assessment of each fault-block development history, and created specific well-work proposal for obtaining remaining reserves.

Confidential Company           Houston, TX

Senior Reservoir Engineer         2006-2008

Confidential Major Independent – Provided reserves data to Netherland, Sewell & Associates: Developed Q1 & Q2 08 new drilling result reserve bookings for proprietary shale gas horizontal drilling program in Arkoma Basin, Fayetteville Shale, Overton, and Marcellus Shale.

Created Aries database and PowerPoint drilling results presentation. Reviewed drilling pattern, horizontal leg length, number of frac stages, and surface microseismic measured frac orientation & length. Optimized productivity by reviewing volume of pumped proppant effects to forecast GUR.

Provided reserves data to Ryder Scott Company: Developed YE 07 reserves documentation for $30M re-development of newly acquired GOM shelf properties for company reserve adds (PUD, PBP) and changes (PDP).

Evaluated all projects in PEEP (using decline curve analysis and volumetrics) to develop YE Budget. Coordinated operating costs, project timing, and investment input from Production Department; fields included newly acquired Gulf of Mexico shelf assets.

Provided reserves data to Cawley, Gillespie & Associates, Consultant: Developed YE 06 reserves documentation for $10M redevelopment of newly acquired property; reserves included adds (PUD, PBP) and changes (PDP).

Evaluated all projects in Aries and performed wellbore utility studies of shut-in and low-rate wells to identify and assess recompletion and re-drill opportunities; extended life of field, which enhanced cashflow and project ROR.

Facilitated successful field-work implementation, additional reserve, production, and accelerated cashflow by providing management-ready well-work descriptions, reserves, and cash flow projections. Improved interpretation of early field performance by researching old well files, analyzing logs, correlating petrophysical information, and amending maps; increased ROR on field purchase vs. initial forecast. Collaborated with geology on prospect risk analysis by recommending purchase of Rose & Associates – Prospect Risk Analysis Suite; subsequently calculated single zone probabilistic resource estimation, chance factor determination, and multi zone amalgamated prospect resource distribution for multiple zones.

MERRILL LYNCH   Philadelphia, PA

Financial Advisor        2000 to 2005

POGO PRODUCING COMPANY  Houston, TX

District Petroleum Engineer (1995 to 1998) | Senior Petroleum Engineer (1998 to 2000)

1995 to 2000 Directed all aspects of managing petroleum production fields for Company. Field assignments included: Thailand offshore (Tantawan, Benchamas, Maliwan), Texas onshore (Lopeno), New Mexico onshore (Lea Co. fields) and GOM OCS (Louisiana State Lease 340, EC 334/335 and WC 252/253).

Key projects details:

Generated $50M for Company by identifying behind-pipe and undeveloped reserves in existing fields. Identified the following: 200 gas zones for commingling in Lopeno Field, South Texas; 500 oil zones for commingling in Southeast New Mexico; 30 partially depleted gas zones ready for new production, and 200 gas zones for commingling in Tantawan Field, Offshore Thailand.

Originated and designed field development program for $100M Benchamas-A and B fields, with 25 horizontal oil wells, gas wells and water flood injection wells; oil wells designed for 3000 BOPD productivity. Also originated and designed a field development program for E. Cameron 334-E consisting of two 100 MMcfd completions.

Monitored outside operated properties, including Pogo’s 4% interest in Mobil-operated sidetracking of WC 352 A-3 to an alternate location.  Recognized bypassed zone of interest in openhole section of well after operator deemed well dry hole.  Well subsequently completed successfully.  Partners BIAPO. Conducted reservoir modeling for waterflood projects using Gemini Solutions–Merlin & Apprentice mapping & simulation software.

Led nodal analyses using Dwight’s PERFORM software; also evaluated reserves and cash flow using Munro Garrett-ARIES software, and retrieved production data using DWIGHT’S CD ROM and online services.

AGIP PETROLEUM Houston, TX

Senior Reservoir Engineer      1991 to 1995

Collaborated with Kaverner to implement deepwater subsea development and tieback to host platform of $20M Agip EB 112/156/157 field; selected wellhead, umbilical and control equipment. Also conducted DST design and testing for wells from semi-submersible drilling rig.

Also worked on other deepwater projects valued at $2M total, including Agip GB 208/252; handled DST design and testing from semi submersible drilling rig.

Initiated, authored, and conducted all Company-sponsored reservoir engineering partner meetings; provided recommendations for stimulation, cased-hole logging, workovers, recompletions, development drilling, and enhanced oil recovery projects. Secured partner consent for participation and initiated field work to achieve mechanical and economic success.

Operated $25M offshore water-flood at G1 102; novel completions incorporated continuous down hole pressure monitoring to dictate initiation / maintenance of water-flood injection while still above volatile oil bubble-point pressure.

Designed, implemented, and operated $8M offshore gas-flood of oil reservoir at SM 175; novel completions incorporated stacked series of multiple sliding sleeves to control expanding gas-flood front breakthrough.

Monitored water-flood voidage balance in two operated water-floods in West Delta 88 / 89, which improved flood front conformance and generated $4M in incremental DCF.

Oversaw outside operated high-producing Norphlet gas operations in Mobil-operated Mobile Bay 822/823 (“Mary Ann”) and horizontal attic oil redevelopment program in Shell-operated MC 194/195/150/151 (“Cognac” 1023’ WD).

As Company lead representative for evaluation of properties for acquisition, attended data rooms for Gulf of Mexico, Gulf of Suez, and Columbia.

Conducted reservoir engineering studies and wellbore utility field studies, and supervised three contract reservoir simulation studies by Intera and Petresim, which employed VIP and ECLIPSE software; identified additional reserves and accelerated all reserves depletion, which resulted in better project DCF metrics.

Individually evaluated all company US reserves and cash flow for SEC using ARIES software.  Interacted with DeGolyer & MacNaughton on Agips’ outside operated reserves determinations.

EDUCATION & PROFESSIONAL DEVELOPMENT

M.S. Petroleum Engineering Systems – University of Louisiana at Lafayette

B.S. Petroleum & Natural Gas Engineering – Pennsylvania State University

B.A. Science – Elizabethtown College

Registered Professional Engineer – State of Texas

Registered Oil & Gas Operator – State of Texas

Please send me more information on this candidate

Resume CV of Candidate 99120. M.Sc. in Geophysics and Petroleum Engineering. Twenty years of experience in the oil and gas industry.  Experienced in seismic processing, structural, stratigraphic, quantitative interpretation, risk analysis, reservoir characterization, reserve estimates in different trap mechanisms, structural styles and petroleum systems.  Six years of North American experience. APEGGA member.

EDUCATION

2003-2005      M.Sc. Petroleum Engineering, University of Houston, Texas

1985-1987      M.Sc. Applied Geophysics,  Ahmadu Bello University, Zaria, Nigeria

1981-1984      B.Sc. Physics, University of Lagos, Lagos, Nigeria

EXPERIENCE

Senior Geophysicist

2008 Major Independent E&P, Canada

• Pioneered the Kingdom software application set up and used it to evaluate 50 km² blocks in the Lower Congo Sedimentary Basin.

Senior Seismic Interpreter

1988-2007 Major E&P, Houston

• Evaluated the Bonga North discovery seismic data and quantitative attribute analysis (SFR of 549 MMBO).
• Evaluated 10 deepwater blocks (Top 100 Prospects & Leads) in Tertiary Niger Delta.
• Carried out review in the southwest Mediterranean block for gas development with 2TCF SFR.
• Evaluated the Kamunsu Cluster Basin frontier petroleum system of 2,350 km² seismic data in Northwest Borneo.
• Carried out Alpha and Foxtrot prospects risking and volumetric (SFR of 200 MMBO).
• Operations Geologist for partner operated blocks drilling, resulting in savings of $2 million USD and divestment from unattractive blocks. 

Senior Geoscientist

1998-1999                   Technology Center, Houston

• Carried out Niger Delta regional structural, stratigraphic and quantitative interpretation (1,400 Prospects & Leads) in 22 Plays in the deep offshore (prolific HC province > 100 Billion BOE).

Senior Geophysicist

1995-1998                   Nigeria

• Carried out prospectivity of 2 partner operated blocks OPLs 211 & 316 and post drill Engule-1 (59 MMBO, 80 Bcfg), Oberan-1 (196 MMBO) wells.
• Drilled 1 well onshore Gongola basin with sub commercial gas discovery.

Seismic Processor

1994                            Netherlands

• Carried out Ahia Field onshore Nigeria 3D (100 km²) seismic processing.
• Evaluated the Geopusher 3D seismic processing productivity tool.

Team Lead 2D3D Seismic Processing

1988-1993                   Nigeria

• Processed Obote 3D (250 km²) seismic onshore Niger Delta.
• Processed 25,000 km of 2D seismic data western Niger Delta.

COMPUTER APPLICATIONS

• Landmark, 123DI, Kingdom, Xstream, Petrel, Strata and AVO.

PROFESSIONAL DEVELOPMENT

2009 Hampson Russell Quantitative Interpretation Course, Calgary

2009                 Seismic Data Inversion CSEG Course, Calgary

2009                 Schlumberger Petrel 2009 Course, Calgary

2009                 Geostats for Reservoir Characterization CSEG Course, Calgary

2009                 Naturally Fractured Reservoirs CSEG Course, Calgary

2009                 Petroleum Geoengineering – SEG/EAEG Course, Calgary

PROFESSIONAL ASSOCIATIONS

• Member with APEGGA
• Member with CSEG
• Memberwith SPE
• Member  with AAPG

REFERENCES

• Available upon request.

Please send me more information on this candidate

Senior Staff Production Engineer

This project is a multi-TCF gas pool being developed by the operator and its partner. The project is slated to be on production in 2 years at an estimated cost in excess of $2 billion.  Our Team is looking to fill a key technical position. We are seeking a Senior Staff Production Engineer to be based in Calgary, Alberta. This position represents a key technical position within the integrated Subsurface Team for multiple deepwater blocks.   Working within a fully integrated team you will be responsible for providing production engineering expertise for the offshore deepwater gas field development project and other fields within the portfolio. This role requires experience in deepwater gas developments, including experience in design, production and analysis.   The position will initially be Calgary based but incumbent must be willing to relocate to if required (ex-pat).

Specific responsibilities include:

• Acting as a technical specialist and resource to the team on all production engineering  matters
• Preparing recommendations and documentation in support of deepwater gas field development and production engineering
• Design and support well completion, re-completion, stimulation and abandonment
• Design and implement workover, artificial lift and sand control
• Initial and final production rate (IPR/TPR) outflow performance evaluation and tubing selection along with optimum rate determination
• Well performance analysis, diagnosis and well surveillance
• Production, injection data management for daily data reporting and analysis
• Ensure adequate well start-up and shut-down procedures are prepared and followed for deepwater wells
• Assist in the development and implementation of flow assurance techniques and program
• Identify risks and risk mitigation strategies/actions
• Close liaison with Drilling and Completions, Facilities and Reservoir Engineers. Liaise with well and well services Supervisor for well operations
• Work with cross-functional team, including FEED team to achieve well and field optimization
• Implement project plans and schedules in a timely manner
• Ensuring that a culture of strong and effective team-work exists the subsurface Team
• Interface with partners and government authorities

Qualifications:

Our ideal candidate will have the following qualifications:

• An Engineering Degree, preferably in Petroleum Engineering. A Masters degree in Geosciences would be a definite asset
• 15 years of Production Engineering experience
• 10 years of international exploration and offshore/deepwater gas field development/production experience, including subsea development/operations, design, production and analysis
• Solid working knowledge with downhole tools and equipment including onshore and offshore operations
• Working knowledge of geology and reservoir engineering
• Proven ability to work in a team environment dealing with people from various disciplines to achieve goals, and to identify and resolve problems
• Strong command of the English language, with good oral and written communication skills

Click here to apply online

Click here for more information

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Resume CV RSS Feed

For more information email us

Resume CV of Candidate 99126.  MBA, MS Petroleum Engineering, BS Chemical Engineering.  Experienced Reservoir Engineer seeking new energy opportunities.  Expert in EOR, heavy oil, conventional, non-conventional and CBM assets.  Open to US and Canada relocation.

PROFILE:

• 7+ years experience in reservoir engineering, simulation and numerical modeling.
• Worked on conventional, non-conventional (EOR), heavy oil and CBM assets
• Extensively applied reservoir engineering tools including reservoir surveillance, statistical, graphical and simulation tools. Proficiency in reservoir engineering and pattern management practices including material balance, injection optimization, conformance improvement, flood pattern surveillance, and performance forecasting.
• Demonstrated strong technical, analytical, problem solving and project management skills.
• Reservoir Simulation skills: Proficiency in streamline, compositional and black oil models (CMG, Eclipse, and Exodus). Specialized knowledge of CO2 miscible, thermal and heavy oil reservoir simulation model building and use.
• Extensive exposure to oil and gas operations including drilling, completions and facilities design.
• Experience in economic analysis, economic models and asset value assessment
• Ability to manage multiple projects, keeping track of daily progress and associated costs and implementing cost-control measures to ensure projects are completed at or below budget.
• Excellent communication skills (verbal, written and presentation)
• Track record of identifying opportunities to improve reserves through new technology, reservoir analysis and management techniques.
• Ability to interact effectively with cross-functional teams and stakeholders.
• Experience in analysis of heavy oil reservoirs with primary, water and steam injection processes. Strong data analysis and computer skills.
• Experience in analysis of CO2 miscible floods and other EOR mechanisms.
• Extensive experience with asset development and reservoir management experience.
• Demonstrated skills in data analysis and statistics,
• Demonstrated strong team working mentoring and training skills

WORK EXPERIENCE

Supervisor, Reservoir Engineering (M.Sc., P.Eng.):

January 2004 – Present

Major Independent

• Identify opportunities to improve asset reserves through new technology, acquisitions, optimization and proper field management techniques.
• Design, develop and monitor multi-lateral horizontal well development plan (including reserves and economic evaluation) for a laterally discontinuous reservoir
• Design, develop and monitor of CO2 miscible flood pilots
• Develop a CO2 commercial development plan for several Fields
• Successfully designed and developed heavy oil Druid field with horizontal wells-bottom water control (conning)
• Reservoir engineering assessment of heavy oil thermal Pilot (CSS and SAGD) for field. Conducted sensitivity study for SAGD operations, including start up strategy, steam split between casing and tubing, steam chamber pressure, steam quality and injection rate.
• Evaluated performance of SAGD versus combination of horizontal producers and vertical injectors.  Compared growth of steam chamber in gas cap and non-gas cap areas. Recommend location of the initial pilot.
• Water flood analysis and optimization for various pools within the Western Canadian Sedimentary Basin including PTA on vertical and horizontal wells, pattern performance analysis and identifying infill drilling potential.
• Develop and update various black oil and compositional simulation models for reservoir assessment including production history matching and phase behavior modeling for various oils and gas samples.
• Evaluate various fields in Alberta and Saskatchewan for EOR and EGR potential
• Evaluate reserves
• Co-ordinate/support reservoir studies (experimental and simulation) contracted out to consultants
• EUB/ADOE compliance related to enhanced oil recovery.
• Provide guidance, coaching, mentorship as required to New Ventures EIT/Junior/Intermediate reservoir engineers
• Provide general reservoir engineering/well test support.
• Conduct in-house reservoir simulation studies for EOR projects.
• Work with New Ventures manager to prioritize, define workflows, help establish timelines/deadlines/milestones and ensure New Ventures reservoir engineering projects are completed in a timely and appropriate fashion.
• Oversee technical reviews of New Ventures reservoir engineering projects
• Track New Ventures reservoir capital cost budget on regular basis – make sure we are within capital budget

Reservoir Engineer: January 2002 – January 2004

Service Company

• Evaluate reserves.
• Interpreting well logs and other geological data.
• Conduct PVT analysis for chemical, hydrocarbon and CO2 miscible floods.
• Conduct reservoir simulation studies for oil and gas clients.
• Evaluate oil recovery from enhanced oil recovery and water flooding schemes.
• Assess CO2 flooding potential for various pools in Alberta.
• Analyze field performance.
• Develop strong working relationship with clients.
• Development of VAPEX and CSS simulation models.

Research assistant: May 2001 – Dec 2002.

University of Calgary / Imperial oil resources.

• Developed, tested and validated a heavy oil numerical simulator.
• Investigated the improved oil recovery in heavy oil reservoirs.
• Developed simulation models for depletion of heavy oil reservoirs

Process Engineer: September 1998 – Dec 1999.

Small Independent.

• Worked in a team of experience chemical engineers on the design and operation of a mixing unit
• Acquired supervision skills by co-coordinating contract labor
• Analyzed plant performance and recommended new opportunities
• Employed technical expertise to trouble-shooting facility operating problems

Special Projects:

• Developed simulation models.
• Investigated the effect of capillary number on gas mobility during flow in reservoirs.

Key courses:

• Reservoir engineering.
• Reservoir simulation.
• Phase behavior of Oil and Gas system.
• Advance topics in heat and mass transfer.
• Applied numerical methods
• Well testing
• Well logging and formation evaluation
• Water flooding
• Phase behavior analysis.
• Petroleum engineering (Drilling and production operations)
• Petroleum/chemical engineering design
• Engineering economics.

EDUCATION

Masters of Business Administration, November 2010

Cornell-Queens MBA.

Masters of Science, Petroleum Engineering, November 2002

University of Calgary, Faculty of engineering

Bachelor of Science, Chemical Engineering, June 1998

University of Lagos, Lagos.

Please send me more information on this candidate

Click here to apply online

Click here for more information

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Resume CV RSS Feed

For more information email us

Click here to apply online

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Resume CV RSS Feed

For more information email us

Resume CV of Candidate 99120. M.Sc. in Geophysics and Petroleum Engineering. Twenty years of experience in the oil and gas industry.  Experienced in seismic processing, structural, stratigraphic, quantitative interpretation, risk analysis, reservoir characterization, reserve estimates in different trap mechanisms, structural styles and petroleum systems.  Six years of North American experience. APEGGA member.

EDUCATION

2003-2005      M.Sc. Petroleum Engineering, University of Houston, Texas

1985-1987      M.Sc. Applied Geophysics,  Ahmadu Bello University, Zaria, Nigeria

1981-1984      B.Sc. Physics, University of Lagos, Lagos, Nigeria

EXPERIENCE

Senior Geophysicist

2008 Major Independent E&P, Canada

• Pioneered the Kingdom software application set up and used it to evaluate 50 km² blocks in the Lower Congo Sedimentary Basin.

Senior Seismic Interpreter

1988-2007 Major E&P, Houston

• Evaluated the Bonga North discovery seismic data and quantitative attribute analysis (SFR of 549 MMBO).
• Evaluated 10 deepwater blocks (Top 100 Prospects & Leads) in Tertiary Niger Delta.
• Carried out review in the southwest Mediterranean block for gas development with 2TCF SFR.
• Evaluated the Kamunsu Cluster Basin frontier petroleum system of 2,350 km² seismic data in Northwest Borneo.
• Carried out Alpha and Foxtrot prospects risking and volumetric (SFR of 200 MMBO).
• Operations Geologist for partner operated blocks drilling, resulting in savings of $2 million USD and divestment from unattractive blocks. 

Senior Geoscientist

1998-1999                   Technology Center, Houston

• Carried out Niger Delta regional structural, stratigraphic and quantitative interpretation (1,400 Prospects & Leads) in 22 Plays in the deep offshore (prolific HC province > 100 Billion BOE).

Senior Geophysicist

1995-1998                   Nigeria

• Carried out prospectivity of 2 partner operated blocks OPLs 211 & 316 and post drill Engule-1 (59 MMBO, 80 Bcfg), Oberan-1 (196 MMBO) wells.
• Drilled 1 well onshore Gongola basin with sub commercial gas discovery.

Seismic Processor

1994                            Netherlands

• Carried out Ahia Field onshore Nigeria 3D (100 km²) seismic processing.
• Evaluated the Geopusher 3D seismic processing productivity tool.

Team Lead 2D3D Seismic Processing

1988-1993                   Nigeria

• Processed Obote 3D (250 km²) seismic onshore Niger Delta.
• Processed 25,000 km of 2D seismic data western Niger Delta.

COMPUTER APPLICATIONS

• Landmark, 123DI, Kingdom, Xstream, Petrel, Strata and AVO.

PROFESSIONAL DEVELOPMENT

2009 Hampson Russell Quantitative Interpretation Course, Calgary

2009                 Seismic Data Inversion CSEG Course, Calgary

2009                 Schlumberger Petrel 2009 Course, Calgary

2009                 Geostats for Reservoir Characterization CSEG Course, Calgary

2009                 Naturally Fractured Reservoirs CSEG Course, Calgary

2009                 Petroleum Geoengineering – SEG/EAEG Course, Calgary

PROFESSIONAL ASSOCIATIONS

• Member with APEGGA
• Member with CSEG
• Memberwith SPE
• Member  with AAPG

REFERENCES

• Available upon request.

Please send me more information on this candidate

Geologist

We are seeking a geologist with a minimum of a BS degree in Geology or related Geoscience field, and 2 to 5 years of experience.  Candidate must have excellent written and verbal skills, and must be proficient with industry computer software.  Seismic sequence stratigraphy of 2D and 3D data required.  Interpretation of multibeam bathymetry, side-scan sonar, and subbottom profiler is a plus. Must have Deep Water GoM experience. We have a unique environment where talent is recognized. This position will come under the wing of seasoned Oil and Gas Geoscientists who are looking to mentor a 2-5 year Geologist and advance them with exposure to the most advance technology available today.

Click here to apply online

Click here for more information

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Resume CV RSS Feed

For more information email us

Click here to apply online

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Resume CV RSS Feed

For more information email us

Resume CV of Candidate 99116. Staff geologist working in the environmental consulting industry years. MS and BS in Geology.  Certified Hazardous Materials Manager and Professional Geologist licensed.  Experience with coordinating and managing various projects including soil and groundwater delineation projects involving a variety of contaminants, sampling of contaminated media, monitoring well and/or soil boring installation, and source removal activities in a multidisciplinary team environment.  Seeking new energy related opportunities and open to relocation.

PROFESSIONAL  EXPERIENCE

Rock Core Identification and Correlation / State Department of Transportation /Member of an engineering investigation project for a new interstate, assisted with the identification and correlation of over 2,000 of rock core from various locations. Assisted with the preparation of cross-sections and boring logs.

Landfill Permit Preparation / Private Client / Member of an engineering and hydrogeology team, assisted with the site investigation boring program and preparation of cross sections for a restricted waste landfill permit application. Assisted with the preparation of geology and hydrogeology portions of the permit narrative.

Foundry and Coal Combustion Waste Classification / Private Client / Assisted with the development of a sampling and analysis plan for the analysis of foundry and coal combustion waste stream. Evaluated analytical results for waste stream and determined waste classifications based on statistical analysis methods in SW-846, IDEM guidance, and Indiana’s Solid Waste Regulations.

Coal Refuse Delineation/ State Department of Natural Resources / Assisted with the soil and rock classification, monitoring well installation and site conceptual model development at an abandoned mine land in Terra Haute, Indiana.  Characterization and delineation of the coal refuse was necessary to develop a corrective action plan for the acid mine drainage.

Groundwater Statistical Evaluations / Various State Clients / Managed and assisted with  groundwater statistical evaluations for restricted waste and municipal solid waste Landfill and RCRA sites, utilizing intra-well  and inter-well statistics in excel and DumpStat software. Prepared relevant investigative and remedial documents for submittal to the state agencies.

Statistical Evaluation Plans (StEP) / Various Clients / Developed and modified statistical evaluation plans for restricted waste and municipal solid waste landfill monitoring for submittal to the IDEM.

Site Characterization per RISC Guidelines / Various Leaking Underground Storage Tank (LUST) Sites and Chlorinated Solvent Sites/ Managed and performed the tasks associated with evaluating the nature and extent of petroleum and chlorinated solvent releases.  These tasks involve coordinating site investigations, collecting geologic, hydrologic and ecologic data and report generation.

Corrective Action Plan Development and Implementation/ Various LUST and Chlorinated Solvent Sites / Provide the client with the most applicable remedial technology that best satisfies the needs of the client.  CAPs implemented at UST sites have included dual phase high-vacuum extraction, mobile vacuum enhanced recovery, natural attenuation monitoring,  source removal, and risk assessment calculations.

UST Closure / Various Clients / Managed and conducted a UST removals and closure in accordance with the IDEM’s RISC program and 1994 UST Branch Guidance.

Hydrogeology / Various State Clients / Conducted percolation and hydraulic conductivity testing to determine the hydraulic characteristics of subsurface aquifers and soil for evaluation.

Phase I Environmental Assessments / Various State Clients /Performed Phase I Environmental Site Assessments per ASTM guidelines and lender requirements.  Phase I experience includes investigations of residential and commercial properties.

PROFESSIONAL REGISTRATIONS

Certified Hazardous Materials Manager

Licensed Professional Geologist

SOFTWARE EXPERIENCE

Microsoft Office (Work, Excel, Outlook, Etc.)

ArcGIS

DumpSTAT

ERDAS IMAGINE

Golden Software (Grapher, Surfer, and Strater)

AutoCAD

Rockware

TRAINING AND CERTIFICATIONS

• Association of State Boards of Geology (ASBOG) Exams, 2008
• 40 hours HAZWOPR, Indianapolis, 2007.
• All current 8 hour refresher courses.

PROFESSIONAL PUBLICATIONS/PRESENTATIONS

Available upon request

AWARDS / SCHOLARSHIPS

Available upon request

Senior Petrophysicist

Calgary, Canada

Our Client, a Major Independent Exploration and Production company has an opportunity for a Senior Petrophysicist with strong North American Onshore unconventional reservoirs experience. The Senior Petrophysicist will support prospect evaluation work by providing both qualitative and quantitative analysis of data relevant to formation evaluation and reservoir characterization. This evaluation work will require integration of information derived from a variety of sources including open and cased hole well logs, mud logs, sidewall cores, full cores, RFT / MDT pressure test / fluid samples, mini-fracs, Diagnostic Fracture Injectivity Tests (DFIT), geochem analysis, and the like. Additionally, the role may also perform advanced geomechanics evaluation in order to make predictions related to wellbore stability assessment, formation sanding potential, principal present-day stresses analysis, and mechanical property determination useful in defining barriers to hydraulic fracture growth. Characterization of naturally fractured reservoirs will be an important aspect of the job.

Minimum Requirements:

Viable candidates must have at least an undergraduate degree in Engineering or Geosciences and a minimum of 15 years of relevant formation evaluation experience as a Petrophysicist including significant experience in unconventional resource plays.

Click here to apply online

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Resume CV RSS Feed

For more information email us