Energy Engineering Careers

Resume CV of Candidate NA-1844237333 Bilingual Spanish Texas A&M Petroleum Drilling Engineer seeking new opportunity in Texas. 

DRILLING ENGINEERING SKILLS

Drilling performance/optimization studies, drill bit design, bit dull evaluation, BHA & drill string design, BHA & drill string vibration modeling, hydraulics optimization, surge & swab evaluation, torque & drag analysis, downhole motor selection & operation, motor & BHA build rate predictions, drilling database searches, utilization of logging software, rock strength analysis, electric log interpretation, basic principles of directional drilling & RSS tools

EXPERIENCE

Drilling Applications Engineer –  TX

Company Confidential (4/10/10 – present) 

Identify drilling dysfunctions & advise on recommended practices & optimized BHAs for efficient drilling

 Investigate unsatisfactory drilling performance to determine root cause & generate preventative actions

 Involved in various drilling optimization projects under development in the Eagle Ford Shale play

Drilling Optimization Engineer – Houston, TX

Company Confidential (3/10/11 & 4/10/11)

 Supported development of real-time optimization software which reduces drilling downtime

 Created cases to help identify pack offs, took weight, overpull, motor stalls, erratic torque & hard stringers

 Monitored rigs from Weatherford RTOC drilling in project

Evaluation Engineering Manager

Company Confidential - Gulf Coast Region (5/06-12/08)

 Responsible for product development and successful application of all downhole drilling tools

 Assist operators with detailed performance studies for critical or strategic applications

 Interpreted drilling vibration data to generate recommendations and cost effective solutions

Drilling Optimization Engineer 

Company Confidential  – Mexico Operations District (8/03-4/06)

 Conducted field studies to enhance drilling performance for company within the Burgos Basin

 Presented technical training and seminars to company employees and clients

 Co-authored an SPE technical paper with company and other firms

Drilling Optimization Engineer – (North Sea)

Company Confidential (1/01-8/03)

 Promoted product development through field evaluations and engineering studies

 Developed drilling recommendations for Britannia-Conoco project as an in-house engineer

 Designed a bi-center bit and generated drilling procedures for a Shell TTRD project

Technical Engineering Manager – Venezuela

Company Confidential  – Venezuela Operations District (2/98 –8/99)

 Presented technical training and seminars for clienteles drilling departments

 Responsible for Technical Sales composed of multinational accounts

 Implemented and maintained drilling database

Applications Engineer – Houston, TX

Company Confidential (12/95–2/98)

 Developed literature and software for analysis and application of products

 Analyzed rock strength programs for bit selection and drilling optimization

 Evaluated field performance of experimental bits and PDC cutter components

Formation Evaluation While Drilling Engineer - LA

Company Confidential – Offshore Louisiana (8/94–12/95)

 Analyzed directional & geological data to improve efficiency of drilling operation

 Operated rig site computers and equipment to collect data pertinent to drilling staff

 Provided recommendations and assistance to the operator, geologists and drilling personnel

Intern Safety Engineer – Houston, TX

Mobil Exploration & Producing- Environmental & Safety Dept. (5/94-8/94)

 Conducted safety audits and developed corrective action plans

 Reviewed disposal projects of Naturally Occurring Radioactive Material

 Maintained contractor safety database and evaluated contractor safety plans

EDUCATION

Texas A&M University; College Station, TX

 B.S. in Petroleum Engineering

 minor in Safety Engineering

 fluent in Spanish

Please send me more information on this candidate

EDUCATION:

Texas A&M University – College Station, Texas May 2002

Masters of Business Administration – Finance Emphasis

Brigham Young University – Provo, Utah December 1997

Bachelors of Science Civil Engineering

Engineer in Training Certificate

Spanish Study Abroad – Argentina Oct 1990 – Oct 1992

EXPERIENCE:

Confidential Company

October 2010  – Present

Managing integration of energy acquisition for global investment bank.

Confidential Company Director Risk Analysis

January 2007 – June 2010

Work directly with CRO on all ad hoc senior management requests and executive reporting. Responsible for risk valuations and analysis in Board of Directors presentations and investor Calls.  Valued other company’s trade books for potential merger and acquisition opportunities.  Forecast the company’s gross margin, stress test the portfolio and reconcile changes to budget for Senior Management.  Worked with Credit group to provide scenario testing for S&P credit survey and margining thresholds.  Manage Term analysts to ensure their forward risk books accurately reflect Companies exposure to market changes.  Developed and maintained risk metrics to update senior management of commodity exposure.

Same Company Manager Risk Analysis

September 2005 – January 2007

Worked with Bear Stearns investment bank to create the Intra–Month and Term risk reports under the joint venture.  Managed the daily reporting of Companies position, P&L and various volumetric and monetary limits on a daily basis.  Responsible for the risk analysis of trader’s physical and financial trades and explanation of changes in position and P&L.  Worked closely with Bear Stearns employees to ensure proper recording of P&L at month end and to reconcile any variance.  Served as main point of contact for Bear Stearns and Company regarding risk and valuation.

Same Company MBA Rotational Program

May 2002 – September 2005

Associate Risk Analysis (Term)

Calculated forward risk books on a daily basis to facilitate trading activities.  Explained any changes to position and P&L to the traders and management as needed.  Booked structured deals in Risk Management System (Nucleus) in order to appropriately manage associated risks.  Worked closely with Structuring group to ensure structured deals are accurately reflected in Nucleus and to reconcile any modeling differences.  Developed tool for deal capture to accurately book all components of heat rate deals in Nucleus and for Term analysts  to check if deal is booked correctly.  Performed ad hoc analysis and projects as needed.

Associate Gas Scheduling

Coordinated with the Gas and Power Desk in order to schedule the correct gas volumes to various plants as needed.  Maintained relationships with several pipeline representatives to ensure gas demand for each plant was met and to avoid costly penalties associated with ramp rates and plant outages.  Worked closely with accounting to settle pipeline invoices and explain differences.  Set up risk book for gas traders to manage fix price exposure and physical gas requirements during bid week.

Associate Risk Analysis (Intra-Month)

Maintained traders positions and P&L and explained respective changes to traders and management as needed.  Monitored  Intra-Month exposures and interfaced with Trading, Deal Capture, Scheduling and Accounting Departments to ensure proper recording of P&L. Monitored daily actualization activities among middle and back office to ensure the integrity of P&L.  Worked closely with accounting to tie out any differences to Risk Flash process at end of month.  Developed improvements to automate and improve efficiency of Intra-Month books.

El Paso Corporation MBA Summer Intern

May 2001 – August 2001

Created hedge strategies for El Paso Field Services in order to comply with FAS 133 requirement.  Compiled hedge strategy documentation for risk book to be maintained by Risk Management Group on an on-going basis.  Performed an extensive series of linear regression analysis on the changes in NGL commodity prices using various indexes as  underlyings.  Determined where Field Services is under/overhedged with regards to price exposure and worked to renegotiate contracts in order to increase the effective NGL volumes that are marketed.

Bechtel Corporation Civil/Structural Engineer

April 1999 – August 2000

Civil/Structural Area Lead Engineer – Aberdeen Chemical Disposal Facility

Responsible for coordinating with client and other engineering disciplines to design and analyze structures, buildings, pipe racks and foundations.

January 1998 – April 1999

Structural Engineer – Chevron Normal Alpha Olefin Expansion Project

Responsible for the production of working drawings and calculations, and the 3-d Micro Station model for reviews with client.  Coordinated with other engineering disciplines throughout the design stage to optimize engineering design.

SKILLS/COMPETENCIES:

Knowledge of options, Black Scholes Model, swaps, futures and other derivatives.

Computer skills: Highly proficient in excel both creation and use of complex excel based models.  Proficient with Nucleus Risk Management System, Curve Manager, LIM, FEA and Microsoft products including Word & PowerPoint. Fluent in Spanish.  Good communication skills and willingness to work as a team.

Please send me more information on this candidate

Project Electrical Engineer

Long-Term Contract Assignment

(Future Direct Hire Possible)

Our client, a leading major energy firm is seeking an experienced Electrical Engineer to assist on several key long-term projects.

Ideal candidate will have 5 – 7 years of energy industry experience in the development of specifications and cost analysis for electrical system prototypes.  Experience in project implementation in an oil and gas environment required with excellent communication and presenation skills. Lean Six Sigma process improvement methods a plus.

BS in Electrical Engineering required, Master’s degree preferred.

Essential Duties and Responsibilities:

* Work with Managers, System Architects, and Project Design Engineer in
quoting information that will aid in the initial quoting process.

* Support the Development and utilization of processes for Electrical
Hardware requirement analysis and documentation, Design documentation and
requirements management.

* Provide Document Control with a complete design package consisting of
requirements and design documentation, schematics, BOM’s, vendor lists, and
conceptual packaging and assembly drawings prior to production launch.

* Participate in all elements of design engineering including design reviews and design verification.

* Support management in identifying internal and external resources to
support product development.

* Ensure that the engineering department design flow processes and procedures
are followed.

* Work concurrently with CAD Services, Business Unit Management,
Manufacturing, Test, Purchasing, and Quality departments through the design
phase of a program. Work to provide a design that not only meets the
customer’s criteria, but is also of high quality, cost effective, and
manufacturability.

* Assigned to projects of diverse scope, where analysis of situation or data
requires an evaluation of identifiable factors.

Click here to apply online

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Resume CV RSS Feed

For more information email us

Resume CV of Candidate RG6962957.  Bilingual Russian Speaker, US Citizen Houston based, seeking new Energy related opportunity.  Texas A&M Master’s in Geophysics.  Open to International travel and relocation.

CASP Consortium, Texas A&M University, 2002-2004
North Caspian Basin: 2D elastic modeling for seismic imaging of salt and subsalt.

Occidental Oil and Gas Corp., summer 2002
Regional/Frontier Exploration: interpreted 2D/3D seismic data and mapped (in time and depth) a number of new sub-salt leads in the North Caspian Basin;
-Facilitated effective communication with economic implications;
-Translated scientific terms, engineering approaches to drilling and production, and all documentation used in the field development for Russian and American geoscientists, engineers (reservoir, drilling and production), and managers;
-Acquired vast amount of knowledge about reservoir, drilling, and production engineering work processes.

Texas A&M University, 2000-2002
Taught Geology 101.

CGG Inc, 2001
-3D land seismic acquisition, California.

Geco Prackla, Schlumberger, summer 2000
-Job set-ups using the Company’s comprehensive Seismic Data Processing software package;
-Comprehensive QC of the results and analysis/rectification of abends.
Ocean Drilling Program, 1999-2000
-Verification and uploading of marine geoscience data into Web-based Oracle database from non-web based Oracle database and old tapes.

Exxon Inc, summer 1999
-Exploration, New Venture: Interpreted 2D reprocessed seismic dataset;
-Identified DHIs;
-Extracted seismic attributes;
-Mapped post-salt prospects in NE Caspian Offshore blocks from 2D reprocessed seismic data.

Exxon Inc., Intensive Course in Sequence Stratigraphy and Seismic Facies Analysis, 1999

Texas A&M University, Non-degree graduate level studies, 1999
Courses include:  Exploration Seismology, Structural Geology, Basin Modeling, Tectonics, among others.

Please send me more information on this candidate