MacNRG Energy Careers

Search Jobs Exploration and Production Energy Resume Energy CV

Senior Reservoir Engineer Thermal SAGD Energy Jobs Calgary Alberta Canada CA

Senior Reservoir Engineer Thermal SAGD Energy Jobs  Calgary, AB

Excellent opportunity for an experience Senior Reservoir Engineer to join our client an International oil and gas company with operations.  The company aims to provide long-term growth and continue to develop technologies and manage projects that will meet the world’s energy and climate changes in a sustainable way.

Our client currently holds a substantial land base of oil sands leases in Northern Alberta which will result in full field development producing over 200,000 bbl/d. The Oil sands Pilot is coming on stream in 2010 at 20,000 bbl/d with plans for further expansion, and the current 10,000 bbl/d SAGD facility is on schedule. The second Oil sands Project is in the planning phase for developing a 40,000 bbl/d commercial plant. The objective of this position is to provide reservoir engineering and simulation support to the development of oil sands assets by using SAGD, solvent co-injection and/or other novel thermal recovery technologies. While you will report directly to the Manager, Reservoir Studies, you  may also be seconded to other Division or Department on a short-term basis.

Duties and Responsibilities:

Conduct numerical modeling, subsurface studies and exploitation planning. Generate production forecasts using reservoir simulation, production analysis and other reservoir engineering techniques. Optimize well pattern layouts, development sequences and well placement. Formulate fit for purpose reservoir surveillance plans to collect reservoir data. Analyze subsurface and surface field data to obtain key reservoir/well performance parameters. Perform regional studies (including analyzing competitor public data) to improve understanding of the SAGD process. Generate risked OBIP, production profiles, recoverable volumes for reservoir management. Participate in the reserve booking process including the evaluation, documentation, presentation and the reporting steps. Liaison with external partners and regulatory agencies. Support regulatory processes including technical justifications to the regulator and offsetting operators. Formulate and implement laboratory data acquisition programs including costing and vendor selection. As an asset team member, actively participate in revising development plans and capital cost forecasts as required. Provide input to economic evaluations, new land acquisition and joint venture opportunities as required. Assist in mentoring less experienced Engineers, EITs and intern students.

Minimum Qualifications:

Ideal candidates must be a Canadian Citizen or be a Canadian Landed Immigrant. Bachelor of Science degree in Engineering and APEGGA membership (P.Eng. designation) is required. 10+ years experience in reservoir engineering and related experience working within an integrated team including Geology, Geophysics and other Engineering disciplines. 10 years minimum experience with the SAGD development process is required. Reservoir experience in thermal recovery of bitumen is required. Exposure to steam solvent co-injection and/or Gas-Over-Bitumen is preferred. Experience with STARS, Exotherm or Eclipse Thermal simulation is required. Strong subsurface technical management skills. Ability to provide recommendations under varying timelines and working with sometimes limited or conflicting data. You must be a self-starter and be able to handle multiple projects concurrently.

Click here to apply online

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Energy Resume Energy CV RSS Feed

For more information email us

Engineering and Commissioning Manager Energy Jobs Calgary Canada CA

Engineering and Commissioning Manager Energy Jobs Calgary Canada CA Do you have 15+ years of experience in progressive Engineering, Project Management and Execution oil and gas projects?

If you have a passion for engineering and innovation that strives for results this may be the opportunity for you!

This E&P Company is looking for an Engineering Manager, where you will be responsible for the management of all engineering aspects of this oil sands project. You will also be responsible the consistency, quality and integrity of the engineering deliverables for all disciplines, with a focus on innovation within engineering as a means to improve construction execution.

This Oil Sands Business Unit is looking for a Engineering and Commissioning Manager to lead and direct operations during commissioning and start up.  In this role, you will provide technical and operational input during Detailed Engineering to improve the effectiveness of the startup period. You will act as a key interface point between Operations and Construction to ensure a smooth transition at the critical time frame of construction completion and initiation of operations. Reporting to the Area Manager, you will be wholly responsible for the planning, preparation, and execution of the field and plant facilities commissioning and startup.

 

Specific responsibilities include:

  • Prepare the initial CSU cost estimate and track performance against the cost estimate
  • Identify commissioning systems, prepare detailed work plans, schedule commissioning activities and execute these activities in the field
  • Work with construction to clearly delineate the most effective strategy for simultaneous construction and operations activities during the construction completion phase
  • Work with the Engineering, Procurement and Construction (EPC) contractor to identify design requirements and improvements to enable an effective start up
  • Work with the EPC contractors to ensure turnover documentation is identified and provided to operations on a timely basis
  • Identify commissioning spares requirements
  • Provide guidance to operations staff on operating procedures and processes for operator training
  • Work with operations to ensure policies, procedures, processes, and practices are followed

Our ideal candidate will have the following qualifications:

  • A technical diploma in a related engineering discipline and ASET Certified Engineering Technologist designation is preferred
  • A First Class Steam Ticket would be an asset
  • 15+ years of process operations experience with a leadership role in at least 2 process startups is required
  • Operations and maintenance leadership experience is required
  • Steam Assisted Gravity Drainage start up experience would be an asset
  • Ability to read Process and Instrumentation diagrams
  • Planning and estimating skills would be an asset
  • Proven track record of preparing equipment and process system set ups, startups, and operating practices
  • Demonstrated ability to advise on strategic decisions, influence successful outcomes, guide decision-making and problem-solving
  • Timely decision making during critical operational cycles
  • A proven commitment to safety and the environment

Certified Training:

  • Hydrogen Sulphide (H2S Alive)

 

Click here to apply online

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Energy Resume Energy CV RSS Feed

For more information email us

Senior Petrophysicist Jobs Houston Texas TX

SENIOR PETROPHYSICIST

HOUSTON, TEXAS

Our Client, one of the world’s largest oil and gas E & P companies, is seeking an experienced Senior Petrophysicist.

In this key role, you will be responsible for providing operational petrophysical support to wells drilling, providing mentoring to junior level Petrophysicists, providing comprehensive formation evaluation program recommendations to all proposed wells.

You will apply your keen petrophysical interpretation techniques using state-of-the-art technology and be involved in petrophysical regional studies to support exploration & development teams.

The ideal candidate will have at minimum of a BS in Geology, Petroleum Engineering or Physics, with a very strong preference for an advance level degree.  You must possess at least 15 or more years of experience petrophysical interpretation and operations. Very familiar with leading software analysis tools are required.

The select candidate will be offered an outstanding Total Compensation Package (Base plus Bonus Potential), and generous benefits.  Relocation available.
Click here to apply online

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Energy Resume Energy CV RSS Feed

For more information email us

Senior Petrophysicist Jobs Calgary Alberta Canada CA

Senior Petrophysicist

Calgary, Canada

Our Client, a Major Independent Exploration and Production company has an opportunity for a Senior Petrophysicist with strong North American Onshore unconventional reservoirs experience. The Senior Petrophysicist will support prospect evaluation work by providing both qualitative and quantitative analysis of data relevant to formation evaluation and reservoir characterization. This evaluation work will require integration of information derived from a variety of sources including open and cased hole well logs, mud logs, sidewall cores, full cores, RFT / MDT pressure test / fluid samples, mini-fracs, Diagnostic Fracture Injectivity Tests (DFIT), geochem analysis, and the like. Additionally, the role may also perform advanced geomechanics evaluation in order to make predictions related to wellbore stability assessment, formation sanding potential, principal present-day stresses analysis, and mechanical property determination useful in defining barriers to hydraulic fracture growth. Characterization of naturally fractured reservoirs will be an important aspect of the job.

Minimum Requirements:

Viable candidates must have at least an undergraduate degree in Engineering or Geosciences and a minimum of 15 years of relevant formation evaluation experience as a Petrophysicist including significant experience in unconventional resource plays.

Click here to apply online

Visit Energy Careers Job Board

International Energy Engineering Jobs RSS Feed

International Energy Engineering Energy Resume Energy CV RSS Feed

For more information email us

CV Resume of Candidate 000927 Experienced Petrophysicist with various reservoir types including carbonate, sandstone, shaly sand and heavy oil seeking new opportunity in US or Canada

HIGHLIGHTS OF QUALIFICATIONS:

–     Petrophysicist with 10+ years experience worked in carbonate reservoir and sandstone reservoir, including 2 years as Petrophysicist in Canada and 12 years in China, 2 years as Geophysical Technician in Canada

–     Good experience in shaly sand reservoir, heavy oil carbonate reservoir and fracture identification, familiar with core analysis and interpretation

–          Skilled in well log data processing, analyzing, interpreting, and formation evaluation, including open hole and cased hole logs

–          Strong software skills in GeoGraphix and GeoFrame, as well as geoSCOUT, and Suffer

–          Calculated reservoir parameters (porosity, permeability, lithology, saturations, and net pay)

–          Skilled in constructing geological cross-sections and curve normalization

–          Three years quick interpretation experience in coal bed methane well log analysis on well-site, log data quality control and correction

–          Bachelor Degree in Geophysical Exploration

PROFESSIONAL EXPERIENCE:

Petrophysical Advisor January 2010June 2010

Major National Oil Company, Damascus, Syria

–          Conducting Tishrine and Sheikh Mansour field (672 Km2, 520+ oil wells) and Oudeh field (192 Km2, 170+ oil wells) in Syria, both are heavy oil carbonate reservoir

–          Providing formation properties and reservoir characterization for Geologist, reservoir simulation and Geophysicist

–          Writing petrophysical studying report for each well

–          Demonstrated ability to balance analyzing single wells by GeoGraphix, and setting up multi-well database by GeoFrame at the same time

–          Providing new wells and surrounding wells petrophysical parameters

–          Providing knowledge transfer and problem solving

Petrophysicist June 2008-December 2009

Tanganyika Oil Company Ltd, Calgary

–          Conducting Tishrine and Sheikh Mansour field, and Oudeh field in Syria

–          Petrophysical analysis (Processed, Analyzed 100+ wells using GeoGraphix)

–          Identifying lithology and fracture from FMI, mud logs and well logs

–          Providing formation properties and reservoir characterization for Petrel modeling, reservoir simulation and Geophysicist

–          Calibrating well log porosity and permeability using core data analysis and cutting descriptions

–          Writing petrophysical studying report for each well

–          Core Review at New Horizon Core Storage and BodyCote Labs

Geophysical Technician 2006-May 2008

Divestco Inc., Calgary

–          Archiving and indexing field, stack and basic seismic data by Indexing Tool, GAS, Media track, Aim, and DDS

–          Copying seismic data from historical media to disk system by UNIX, M5U, 9 tracks and DEMUX

–          Reformatting SEGY, SEGA, SEGD and SEGB seismic data as per client request

–          Performing ACC Verifier Project by ACC Verifier, Database, and OBS

–          Reformatting IBMTRACE Lacey file to SEGY, classifying stack data by SEGYNAMER

Petrophysicist 1993-2005

China Petroleum & Chemical Corporation (SINOPEC)

–          Wrote 100+ well log interpretation reports

–          Processed and interpreted well log data of 300+ wells including open hole and cased hole from different basins

–          Experienced in coal bed methane well log analysis in North of China

–    Determined formation properties (porosity, water saturation, net pay) in clastic reservoirs from well log interpretation and core analysis

–          Identified lithology, especially in shaly sand profile by analyzing well log data

–          Organized well log data, data QC and correction on well-site

–          Evaluated petrophysical data for well drilling completion or abandonment decisions, perforation intervals and reserves estimates

–          Picked tops and completed stratigraphic cross sections

–          Created structure map, isopach, net pay and HCPV

Well Log Technician

SINOPEC, China                                                                                                     1991-1993

–    Digitized well log curves

–    Prepared log curves and compiled reports

–    Collected core data, test data, production data and seismic data, and maintained the database

–    Scanned, classified documents and images, log data entry

–    Converted raw data to LIS and LAS files

EDUCATION:

Bachelor Degree in Geophysical Exploration                                                                 1991

Changchun University of Geology, Changchun, China

English as Second Language program                                                                2005-2006

Bow Valley College and CCIS ESL Program

Please send me more information on this candidate

Energy Resume Energy CV Reservoir Engineer with MBA, MS Petroleum Engineering, BS Chemical Engineering seeking Energy Opportunities

Energy Resume Energy CV of Candidate 99126.  MBA, MS Petroleum Engineering, BS Chemical Engineering.  Experienced Reservoir Engineer seeking new energy opportunities.  Expert in EOR, heavy oil, conventional, non-conventional and CBM assets.  Open to US and Canada relocation.

PROFILE:

  • 7+ years experience in reservoir engineering, simulation and numerical modeling.
  • Worked on conventional, non-conventional (EOR), heavy oil and CBM assets
  • Extensively applied reservoir engineering tools including reservoir surveillance, statistical, graphical and simulation tools. Proficiency in reservoir engineering and pattern management practices including material balance, injection optimization, conformance improvement, flood pattern surveillance, and performance forecasting.
  • Demonstrated strong technical, analytical, problem solving and project management skills.
  • Reservoir Simulation skills: Proficiency in streamline, compositional and black oil models (CMG, Eclipse, and Exodus). Specialized knowledge of CO2 miscible, thermal and heavy oil reservoir simulation model building and use.
  • Extensive exposure to oil and gas operations including drilling, completions and facilities design.
  • Experience in economic analysis, economic models and asset value assessment
  • Ability to manage multiple projects, keeping track of daily progress and associated costs and implementing cost-control measures to ensure projects are completed at or below budget.
  • Excellent communication skills (verbal, written and presentation)
  • Track record of identifying opportunities to improve reserves through new technology, reservoir analysis and management techniques.
  • Ability to interact effectively with cross-functional teams and stakeholders.
  • Experience in analysis of heavy oil reservoirs with primary, water and steam injection processes. Strong data analysis and computer skills.
  • Experience in analysis of CO2 miscible floods and other EOR mechanisms.
  • Extensive experience with asset development and reservoir management experience.
  • Demonstrated skills in data analysis and statistics,
  • Demonstrated strong team working mentoring and training skills

WORK EXPERIENCE

Supervisor, Reservoir Engineering (M.Sc., P.Eng.):

January 2004 – Present

Major Independent

  • Identify opportunities to improve asset reserves through new technology, acquisitions, optimization and proper field management techniques.
  • Design, develop and monitor multi-lateral horizontal well development plan (including reserves and economic evaluation) for a laterally discontinuous reservoir
  • Design, develop and monitor of CO2 miscible flood pilots
  • Develop a CO2 commercial development plan for several Fields
  • Successfully designed and developed heavy oil Druid field with horizontal wells-bottom water control (conning)
  • Reservoir engineering assessment of heavy oil thermal Pilot (CSS and SAGD) for field. Conducted sensitivity study for SAGD operations, including start up strategy, steam split between casing and tubing, steam chamber pressure, steam quality and injection rate.
  • Evaluated performance of SAGD versus combination of horizontal producers and vertical injectors.  Compared growth of steam chamber in gas cap and non-gas cap areas. Recommend location of the initial pilot.
  • Water flood analysis and optimization for various pools within the Western Canadian Sedimentary Basin including PTA on vertical and horizontal wells, pattern performance analysis and identifying infill drilling potential.
  • Develop and update various black oil and compositional simulation models for reservoir assessment including production history matching and phase behavior modeling for various oils and gas samples.
  • Evaluate various fields in Alberta and Saskatchewan for EOR and EGR potential
  • Evaluate reserves
  • Co-ordinate/support reservoir studies (experimental and simulation) contracted out to consultants
  • EUB/ADOE compliance related to enhanced oil recovery.
  • Provide guidance, coaching, mentorship as required to New Ventures EIT/Junior/Intermediate reservoir engineers
  • Provide general reservoir engineering/well test support.
  • Conduct in-house reservoir simulation studies for EOR projects.
  • Work with New Ventures manager to prioritize, define workflows, help establish timelines/deadlines/milestones and ensure New Ventures reservoir engineering projects are completed in a timely and appropriate fashion.
  • Oversee technical reviews of New Ventures reservoir engineering projects
  • Track New Ventures reservoir capital cost budget on regular basis – make sure we are within capital budget

Reservoir Engineer: January 2002 – January 2004

Service Company

  • Evaluate reserves.
  • Interpreting well logs and other geological data.
  • Conduct PVT analysis for chemical, hydrocarbon and CO2 miscible floods.
  • Conduct reservoir simulation studies for oil and gas clients.
  • Evaluate oil recovery from enhanced oil recovery and water flooding schemes.
  • Assess CO2 flooding potential for various pools in Alberta.
  • Analyze field performance.
  • Develop strong working relationship with clients.
  • Development of VAPEX and CSS simulation models.

Research assistant: May 2001 – Dec 2002.

University of Calgary / Imperial oil resources.

  • Developed, tested and validated a heavy oil numerical simulator.
  • Investigated the improved oil recovery in heavy oil reservoirs.
  • Developed simulation models for depletion of heavy oil reservoirs

Process Engineer: September 1998 – Dec 1999.

Small Independent.

  • Worked in a team of experience chemical engineers on the design and operation of a mixing unit
  • Acquired supervision skills by co-coordinating contract labor
  • Analyzed plant performance and recommended new opportunities
  • Employed technical expertise to trouble-shooting facility operating problems

Special Projects:

  • Developed simulation models.
  • Investigated the effect of capillary number on gas mobility during flow in reservoirs.

Key courses:

  • Reservoir engineering.
  • Reservoir simulation.
  • Phase behavior of Oil and Gas system.
  • Advance topics in heat and mass transfer.
  • Applied numerical methods
  • Well testing
  • Well logging and formation evaluation
  • Water flooding
  • Phase behavior analysis.
  • Petroleum engineering (Drilling and production operations)
  • Petroleum/chemical engineering design
  • Engineering economics.

EDUCATION

Masters of Business Administration, November 2010

Cornell-Queens MBA.

Masters of Science, Petroleum Engineering, November 2002

University of Calgary, Faculty of engineering

Bachelor of Science, Chemical Engineering, June 1998

University of Lagos, Lagos.

Please send me more information on this candidate